• Home
 · 
• OLE/COM/DCOM/Active-X
 · 
• VBScript Sample: Send an SMS message through a hayes compatible, mobile phone. Tested with Nokia 63

VBScript Sample: Send an SMS message through a hayes compatible, mobile phone. Tested with Nokia 63

VBScript Sample: Send an SMS message through a hayes compatible, mobile phone. Tested with Nokia 6310, Nokia 6310i and Ericsson F221.

Rate VBScript Sample: Send an SMS message through a hayes compatible, mobile phone. Tested with Nokia 63

• 1
• 2
• 3
• 4
• 5

(2(2 Vote))

' Download it from http://www.vahland.com/pub/asmsctrl.dll
' and register it on your machine.
' Read http://www.vahland.com/pub/asmsctrl.htm for more info

Option Explicit

Dim asObj

Set asObj = CreateObject( "ActiveXperts.SMSC" )

' MODEM PROPERTIES
Do
    asObj.PortID = inputbox( "On which Comport is modem or GSM connected? (1, 2, 3, ..)", "Input" )
Loop until asObj.PortID <> ""

' SENDER and RECIPIENT
asObj.Sender = "00000000000"     ' Set your phone number here; only digits are allow, minimum 1 character, max. 16 characters
Do
    asObj.Recipient = inputbox( "Enter the recipients phone number (only digits allowed, no spaces etc.)", "Input" )
Loop until asObj.Recipient <> ""

' MESSAGE
Do
    asObj.MessageText = inputbox( "Enter the message text you want to send to the recipient. Only the first 160 characters of the message will be sent", "Input" )
Loop until asObj.MessageText <> ""


' Send the mesage to the recipient through the locally connected GSM phone
WScript.Echo "Sending the message..."
asObj.SendMessage FALSE    ' FALSE means: not through provider, but through direct connected GSM

If( asObj.LastError <> 0 ) Then
    WScript.Echo "Failed to send message, error: " & asObj.LastError & " (" & GetErrorString( asObj.LastError ) & ")"
    WScript.Echo "To trace all commands sent/received through modem, set the 'LogFile' property,"
    WScript.Echo "for instance, asObj.LogFile = " & Chr( 34 ) & "c:\mylog.txt" & Chr( 34 ) & "."
Else
    WScript.Echo "Message successfully delivered"
End If

' ********************************************************************

Function GetErrorString( lError )
    GetErrorString = "Unknown error"
    Select Case lError
        Case 0
            GetErrorString = "SUCCESS"
        Case 1
            GetErrorString = "Evaluation period has expired"
        Case 2
            GetErrorString = "License was entered, but invalid"
        Case 10
            GetErrorString = "Invalid provider dial string"
        Case 11
            GetErrorString = "Message was sent to SMS provider, but no reponse received"
        Case 12
            GetErrorString = "Message was sent to SMS provider, SMS provider reported a synax error"
        Case 13
            GetErrorString = "Message was sent to SMS provider, SMS provider didn't accept message"
        Case 30
            GetErrorString = "Invalid sender address"
        Case 31
            GetErrorString = "Invalid recipient address"
        Case 32
            GetErrorString = "Invalid message"
        Case 50
            GetErrorString = "No response from modem"
        Case 51
            GetErrorString = "Unexpected response from modem"
        Case 52
            GetErrorString = "Error response from modem"
        Case 53
            GetErrorString = "No dialtone detected upon attempt to connect to remote party"
        Case 54
            GetErrorString = "No carrier reported while connecting to remote party"
        Case 55
            GetErrorString = "No answer reported while connecting to remote party"
        Case 56
            GetErrorString = "Busy tone reported while connecting to remote party"
        Case 100
            GetErrorString = "Generic port Error"
        Case 101
            GetErrorString = "Invalid parameter"
        Case 102
            GetErrorString = "Invalid port. Most probably, port does not exist or is in use"
        Case 103
            GetErrorString = "Unable to perform operation because port it already opened"
        Case 104
            GetErrorString = "Generic open port error"
        Case 105
            GetErrorString = "Unable to initialize port"
        Case 106
            GetErrorString = "Unable to write to port"
        Case 107
            GetErrorString = "Unable to write directly to port"
        Case 108
            GetErrorString = "Unable to read from port"
        Case 109
            GetErrorString = "Unable to retrieve device information"
        Case 110
            GetErrorString = "Unable to change device settings"
        Case 111
            GetErrorString = "Unable to purge the port"
        Case 112
            GetErrorString = "Timeout"
    End Select
End Function