• Home
 · 
• Miscellaneous
 · 
• VB Error Number and Description more than 650

VB Error Number and Description more than 650

VB Error Number and Description more than 650

Rate VB Error Number and Description more than 650

• 1
• 2
• 3
• 4
• 5

(1(1 Vote))

1        Incorrect function.
2        The system cannot find the file specified.
3        The system cannot find the path specified.
4        The system cannot open the file.
5        Access is denied.
6        The handle is invalid.
7        The storage control blocks were destroyed.
8        Not enough storage is available to process this command.
9        The storage control block address is invalid.
10        The environment is incorrect.
11        An attempt was made to load a program with an incorrect format.
12        The access code is invalid.
13        The data is invalid.
14        Not enough storage is available to complete this operation.
15        The system cannot find the drive specified.
16        The directory cannot be removed.
17        The system cannot move the file to a different disk drive.
18        There are no more files.
19        The media is write protected.
20        The system cannot find the device specified.
21        The device is not ready.
22        The device does not recognize the command.
23        Data error (cyclic redundancy check)
24        The program issued a command but the command length is incorrect.
25        The drive cannot locate a specific area or track on the disk.
26        The specified disk or diskette cannot be accessed.
27        The drive cannot find the sector requested.
28        The printer is out of paper.
29        The system cannot write to the specified device.
30        The system cannot read from the specified device.
31        A device attached to the system is not functioning.
32        The process cannot access the file because it is being used by another process.
33        The process cannot access the file because another process has locked a portion of the file.
34        The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.
36        Too many files opened for sharing.
38        Reached end of file.
39        The disk is full.
50        The network request is not supported.
51        The remote computer is not available.
52        A duplicate name exists on the network.
53        The network path was not found.
54        The network is busy.
55        The specified network resource or device is no longer available.
56        The network BIOS command limit has been reached.
57        A network adapter hardware error occurred.
58        The specified server cannot perform the requested operation.
59        An unexpected network error occurred.
60        The remote adapter is not compatible.
61        The printer queue is full.
62        Space to store the file waiting to be printed is not available on the server.
63        Your file waiting to be printed was deleted.
64        The specified network name is no longer available.
65        Network access is denied.
66        The network resource type is not correct.
67        The network name cannot be found.
68        The name limit for the local computer network adapter card was exceeded.
69        The network BIOS session limit was exceeded.
70        The remote server has been paused or is in the process of being started.
71        No more connections can be made to this remote computer at this time because there are already as many	connections as the computer can accept.
72        The specified printer or disk device has been paused.
80        The file exists.
82        The directory or file cannot be created.
83        Fail on INT 24
84        Storage to process this request is not available.
85        The local device name is already in use.
86        The specified network password is not correct.
87        The parameter is incorrect.
88        A write fault occurred on the network.
89        The system cannot start another process at this time.
100        Cannot create another system semaphore.
101        The exclusive semaphore is owned by another process.
102        The semaphore is set and cannot be closed.
103        The semaphore cannot be set again.
104        Cannot request exclusive semaphores at interrupt time.
105        The previous ownership of this semaphore has ended.
106        Insert the diskette for drive %1.
107        Program stopped because alternate diskette was not inserted.
108        The disk is in use or locked by another process.
109        The pipe has been ended.
110        The system cannot open the device or file specified.
111        The file name is too long.
112        There is not enough space on the disk.
113        No more internal file identifiers available.
114        The target internal file identifier is incorrect.
117        The IOCTL call made by the application program is not correct.
118        The verify-on-write switch parameter value is not correct.
119        The system does not support the command requested.
120        This function is only valid in Win32 mode.
121        The semaphore timeout period has expired.
122        The data area passed to a system call is too small.
123        The filename, directory name, or volume label syntax is incorrect.
124        The system call level is not correct.
125        The disk has no volume label.
126        The specified module could not be found.
127        The specified procedure could not be found.
128        There are no child processes to wait for.
129        The %1 application cannot be run in Win32 mode.
130        Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.
131        An attempt was made to move the file pointer before the beginning of the file.
132        The file pointer cannot be set on the specified device or file.
133        A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
134        An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
135        An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
136        The system tried to delete the JOIN of a drive that is not joined.
137        The system tried to delete the substitution of a drive that is not substituted.
138        The system tried to join a drive to a directory on a joined drive.
139        The system tried to substitute a drive to a directory on a substituted drive.
140        The system tried to join a drive to a directory on a substituted drive.
141        The system tried to SUBST a drive to a directory on a joined drive.
142        The system cannot perform a JOIN or SUBST at this time.
143        The system cannot join or substitute a drive to or for a directory on the same drive.
144        The directory is not a subdirectory of the root directory.
145        The directory is not empty.
146        The path specified is being used in a substitute.
147        Not enough resources are available to process this command.
148        The path specified cannot be used at this time.
149        An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous		substitute.
150        System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.
151        The number of specified semaphore events for DosMuxSemWait is not correct.
152        DosMuxSemWait did not execute; too many semaphores are already set.
153        The DosMuxSemWait list is not correct.
154        The volume label you entered exceeds the label character limit of the target file system.
155        Cannot create another thread.
156        The recipient process has refused the signal.
157        The segment is already discarded and cannot be locked.
158        The segment is already unlocked.
159        The address for the thread ID is not correct.
160        The argument string passed to DosExecPgm is not correct.
161        The specified path is invalid.
162        A signal is already pending.
164        No more threads can be created in the system.
167        Unable to lock a region of a file.
170        The requested resource is in use.
173        A lock request was not outstanding for the supplied cancel region.
174        The file system does not support atomic changes to the lock type.
180        The system detected a segment number that was not correct.
182        The operating system cannot run %1.
183        Cannot create a file when that file already exists.
186        The flag passed is not correct.
187        The specified system semaphore name was not found.
188        The operating system cannot run %1.
189        The operating system cannot run %1.
190        The operating system cannot run %1.
191        Cannot run %1 in Win32 mode.
192        The operating system cannot run %1.
193        %1 is not a valid Win32 application.
194        The operating system cannot run %1.
195        The operating system cannot run %1.
196        The operating system cannot run this application program.
197        The operating system is not presently configured to run this application.
198        The operating system cannot run %1.
199        The operating system cannot run this application program.
200        The code segment cannot be greater than or equal to 64KB.
201        The operating system cannot run %1.
202        The operating system cannot run %1.
203        The system could not find the environment option that was entered.
205        No process in the command subtree has a signal handler.
206        The filename or extension is too long.
207        The ring 2 stack is in use.
208        The global filename characters, * or ?, are entered incorrectly or too many global filename characters are 	specified.
209        The signal being posted is not correct.
210        The signal handler cannot be set.
212        The segment is locked and cannot be reallocated.
214        Too many dynamic link modules are attached to this program or dynamic link module.
215        Can't nest calls to LoadModule.
230        The pipe state is invalid.
231        All pipe instances are busy.
232        The pipe is being closed.
233        No process is on the other end of the pipe.
234        More data is available.
240        The session was cancelled.
254        The specified extended attribute name was invalid.
255        The extended attributes are inconsistent.
259        No more data is available.
266        The Copy API cannot be used.
267        The directory name is invalid.
275        The extended attributes did not fit in the buffer.
276        The extended attribute file on the mounted file system is corrupt.
277        The extended attribute table file is full.
278        The specified extended attribute handle is invalid.
282        The mounted file system does not support extended attributes.
288        Attempt to release mutex not owned by caller.
298        Too many posts were made to a semaphore.
299        Only part of a Read/WriteProcessMemory request was completed.
317        The system cannot find message for message number 0x%1 in message file for %2.
487        Attempt to access invalid address.
534        Arithmetic result exceeded 32 bits.
535        There is a process on other end of the pipe.
536        Waiting for a process to open the other end of the pipe.
994        Access to the extended attribute was denied.
995        The I/O operation has been aborted because of either a thread exit or an application request.
996        Overlapped I/O event is not in a signalled state.
997        Overlapped I/O operation is in progress.
998        Invalid access to memory location.
999        Error performing inpage operation.
1001        Recursion too deep, stack overflowed.
1002        The window cannot act on the sent message.
1003        Cannot complete this function.
1004        Invalid flags.
1005        The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupt.
1006        The volume for a file has been externally altered such that the opened file is no longer valid.
1007        The requested operation cannot be performed in full-screen mode.
1008        An attempt was made to reference a token that does not exist.
1009        The configuration registry database is corrupt.
1010        The configuration registry key is invalid.
1011        The configuration registry key could not be opened.
1012        The configuration registry key could not be read.
1013        The configuration registry key could not be written.
1014        One of the files in the Registry database had to be recovered by use of a log or alternate copy.  The recovery was successful.
1015        The Registry is corrupt. The structure of one of the files that contains Registry data is corrupt, or the system's image of the file in memory is corrupt, or the file could not be recovered because the alternate 	copy or log was absent or corrupt.
1016        An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry.
1017        The system has attempted to load or restore a file into the Registry, but the specified file is not in a Registry file format.
1018        Illegal operation attempted on a Registry key which has been marked for deletion.
1019        System could not allocate the required space in a Registry log.
1020        Cannot create a symbolic link in a Registry key that already has subkeys or values.
1021        Cannot create a stable subkey under a volatile parent key.
1022        A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.
1051        A stop control has been sent to a service which other running services are dependent on.
1052        The requested control is not valid for this service
1053        The service did not respond to the start or control request in a timely fashion.
1054        A thread could not be created for the service.
1055        The service database is locked.
1056        An instance of the service is already running.
1057        The account name is invalid or does not exist.
1058        The specified service is disabled and cannot be started.
1059        Circular service dependency was specified.
1060        The specified service does not exist as an installed service.
1061        The service cannot accept control messages at this time.
1062        The service has not been started.
1063        The service process could not connect to the service controller.
1064        An exception occurred in the service when handling the control request.
1065        The database specified does not exist.
1066        The service has returned a service-specific error code.
1067        The process terminated unexpectedly.
1068        The dependency service or group failed to start.
1069        The service did not start due to a logon failure.
1070        After starting, the service hung in a start-pending state.
1071        The specified service database lock is invalid.
1072        The specified service has been marked for deletion.
1073        The specified service already exists.
1074        The system is currently running with the last-known-good configuration.
1075        The dependency service does not exist or has been marked for deletion.
1076        The current boot has already been accepted for use as the last-known-good control set.
1077        No attempts to start the service have been made since the last boot.
1078        The name is already in use as either a service name or a service display name.
1100        The physical end of the tape has been reached.
1101        A tape access reached a filemark.
1102        Beginning of tape or partition was encountered.
1103        A tape access reached the end of a set of files.
1104        No more data is on the tape.
1105        Tape could not be partitioned.
1106        When accessing a new tape of a multivolume partition, the current blocksize is incorrect.
1107        Tape partition information could not be found when loading a tape.
1108        Unable to lock the media eject mechanism.
1109        Unable to unload the media.
1110        Media in drive may have changed.
1111        The I/O bus was reset.
1112        No media in drive.
1113        No mapping for the Unicode character exists in the target multi-byte code page.
1114        A dynamic link library (DLL) initialization routine failed.
1115        A system shutdown is in progress.
1116        Unable to abort the system shutdown because no shutdown was in progress.
1117        The request could not be performed because of an I/O device error.
1118        No serial device was successfully initialized.  The serial driver will unload.
1119        Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.
1120        A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
1121        A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
1122        No ID address mark was found on the floppy disk.
1123        Mismatch between the floppy disk sector ID field and the floppy disk controller track address.
1124        The floppy disk controller reported an error that is not recognized by the floppy disk driver.
1125        The floppy disk controller returned inconsistent results in its registers.
1126        While accessing the hard disk, a recalibrate operation failed, even after retries.
1127        While accessing the hard disk, a disk operation failed even after retries.
1128        While accessing the hard disk, a disk controller reset was needed, but even that failed.
1129        Physical end of tape encountered.
1130        Not enough server storage is available to process this command.
1131        A potential deadlock condition has been detected.
1132        The base address or the file offset specified does not have the proper alignment.
1140        An attempt to change the system power state was vetoed by another application or driver.
1141        The system BIOS failed an attempt to change the system power state.
1150        The specified program requires a newer version of Windows.
1151        The specified program is not a Windows or MS-DOS program.
1152        Cannot start more than one instance of the specified program.
1153        The specified program was written for an older version of Windows.
1154        One of the library files needed to run this application is damaged.
1155        No application is associated with the specified file for this operation.
1156        An error occurred in sending the command to the application.
1157        One of the library files needed to run this application cannot be found.
1200        The specified device name is invalid.
1201        The device is not currently connected but it is a remembered connection.
1202        An attempt was made to remember a device that had previously been remembered.
1203        No network provider accepted the given network path.
1204        The specified network provider name is invalid.
1205        Unable to open the network connection profile.
1206        The network connection profile is corrupt.
1207        Cannot enumerate a non-container.
1208        An extended error has occurred.
1209        The format of the specified group name is invalid.
1210        The format of the specified computer name is invalid.
1211        The format of the specified event name is invalid.
1212        The format of the specified domain name is invalid.
1213        The format of the specified service name is invalid.
1214        The format of the specified network name is invalid.
1215        The format of the specified share name is invalid.
1216        The format of the specified password is invalid.
1217        The format of the specified message name is invalid.
1218        The format of the specified message destination is invalid.
1219        The credentials supplied conflict with an existing set of credentials.
1220        An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
1221        The workgroup or domain name is already in use by another computer on the network.
1222        The network is not present or not started.
1223        The operation was cancelled by the user.
1224        The requested operation cannot be performed on a file with a user mapped section open.
1225        The remote system refused the network connection.
1226        The network connection was gracefully closed.
1227        The network transport endpoint already has an address associated with it.
1228        An address has not yet been associated with the network endpoint.
1229        An operation was attempted on a non-existent network connection.
1230        An invalid operation was attempted on an active network connection.
1231        The remote network is not reachable by the transport.
1232        The remote system is not reachable by the transport.
1233        The remote system does not support the transport protocol.
1234        No service is operating at the destination network endpoint on the remote system.
1235        The request was aborted.
1236        The network connection was aborted by the local system.
1237        The operation could not be completed.  A retry should be performed.
1238        A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.
1239        Attempting to login during an unauthorized time of day for this account.
1240        The account is not authorized to login from this station.
1241        The network address could not be used for the operation requested.
1242        The service is already registered.
1243        The specified service does not exist.
1244        The operation being requested was not performed because the user has not been authenticated.
1245        The operation being requested was not performed because the user has not logged on to the network.The specified service does not exist.
1246        Return that wants caller to continue with work in progress.
1247        An attempt was made to perform an initialization operation when initialization has already been completed.
1248        No more local devices.
1300        Not all privileges referenced are assigned to the caller.
1301        Some mapping between account names and security IDs was not done.
1302        No system quota limits are specifically set for this account.
1303        No encryption key is available.  A well-known encryption key was returned.
1304        The NT password is too complex to be converted to a LAN Manager password.  The LAN Manager password returned is a NULL string.
1305        The revision level is unknown.
1306        Indicates two revision levels are incompatible.
1307        This security ID may not be assigned as the owner of this object.
1308        This security ID may not be assigned as the primary group of an object.
1309        An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
1310        The group may not be disabled.
1311        There are currently no logon servers available to service the logon request.
1312         A specified logon session does not exist.  It may already have  been terminated.
1313         A specified privilege does not exist.
1314         A required privilege is not held by the client.
1315        The name provided is not a properly formed account name.
1316        The specified user already exists.
1317        The specified user does not exist.
1318        The specified group already exists.
1319        The specified group does not exist.
1320        Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.
1321        The specified user account is not a member of the specified group account.
1322        The last remaining administration account cannot be disabled or deleted.
1323        Unable to update the password.  The value provided as the current password is incorrect.
1324        Unable to update the password.  The value provided for the new password contains values that are not allowed in passwords.
1325        Unable to update the password because a password update rule has been violated.
1326        Logon failure: unknown user name or bad password.
1327        Logon failure: user account restriction.
1328        Logon failure: account logon time restriction violation.
1329        Logon failure: user not allowed to log on to this computer.
1330        Logon failure: the specified account password has expired.
1331        Logon failure: account currently disabled.
1332        No mapping between account names and security IDs was done.
1333        Too many local user identifiers (LUIDs) were requested at one time.
1334        No more local user identifiers (LUIDs) are available.
1335        The subauthority part of a security ID is invalid for this particular use.
1336        The access control list (ACL) structure is invalid.
1337        The security ID structure is invalid.
1338        The security descriptor structure is invalid.
1340        The inherited access control list (ACL) or access control entry (ACE) could not be built.
1341        The server is currently disabled.
1342        The server is currently enabled.
1343        The value provided was an invalid value for an identifier authority.
1344        No more memory is available for security information updates.
1345        The specified attributes are invalid, or incompatible with the attributes for the group as a whole.
1346        Either a required impersonation level was not provided, or the provided impersonation level is invalid.
1347        Cannot open an anonymous level security token.
1348        The validation information class requested was invalid.
1349        The type of the token is inappropriate for its attempted use.
1350        Unable to perform a security operation on an object which has no associated security.
1351        Indicates a Windows NT Server could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved.
1352        The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.
1353        The domain was in the wrong state to perform the security operation.
1354        This operation is only allowed for the Primary Domain Controller of the domain.
1355        The specified domain did not exist.
1356        The specified domain already exists.
1357        An attempt was made to exceed the limit on the number of domains per server.
1358        Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.
1359        The security account database contains an internal inconsistency.
1360        Generic access types were contained in an access mask which should already be mapped to non-generic types.
1361        A security descriptor is not in the right format (absolute or self-relative).
1362        The requested action is restricted for use by logon processes only.  The calling process has not registered as a logon process.
1363        Cannot start a new logon session with an ID that is already in use.
1364        A specified authentication package is unknown.
1365        The logon session is not in a state that is consistent with the requested operation.
1366        The logon session ID is already in use.
1367        A logon request contained an invalid logon type value.
1368        Unable to impersonate via a named pipe until data has been read from that pipe.
1369        The transaction state of a Registry subtree is incompatible with the requested operation.
1370        An internal security database corruption has been encountered.
1371        Cannot perform this operation on built-in accounts.
1372        Cannot perform this operation on this built-in special group.
1373        Cannot perform this operation on this built-in special user.
1374        The user cannot be removed from a group because the group is currently the user's primary group.
1375        The token is already in use as a primary token.
1376        The specified local group does not exist.
1377        The specified account name is not a member of the local group.
1378        The specified account name is already a member of the local group.
1379        The specified local group already exists.
1380        Logon failure: the user has not been granted the requested logon type at this computer.
1381        The maximum number of secrets that may be stored in a single system has been exceeded.
1382        The length of a secret exceeds the maximum length allowed.
1383        The local security authority database contains an internal inconsistency.
1384        During a logon attempt, the user's security context accumulated too many security IDs.
1385        Logon failure: the user has not been granted the requested logon type at this computer.
1386        A cross-encrypted password is necessary to change a user password.
1387        A new member could not be added to a local group because the member does not exist.
1388        A new member could not be added to a local group because the member has the wrong account type.
1389        Too many security IDs have been specified.
1390        A cross-encrypted password is necessary to change this user password.
1391        Indicates an ACL contains no inheritable components
1392        The file or directory is corrupt and non-readable.
1393        The disk structure is corrupt and non-readable.
1394        There is no user session key for the specified logon session.
1395        The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.
1400        Invalid window handle.
1401        Invalid menu handle.
1402        Invalid cursor handle.
1403        Invalid accelerator table handle.
1404        Invalid hook handle.
1405        Invalid handle to a multiple-window position structure.
1406        Cannot create a top-level child window.
1407        Cannot find window class.
1408        Invalid window, belongs to other thread.
1409        Hot key is already registered.
1410        Class already exists.
1411        Class does not exist.
1412        Class still has open windows.
1413        Invalid index.
1414        Invalid icon handle.
1415        Using private DIALOG window words.
1416        The listbox identifier was not found.
1417        No wildcards were found.
1418        Thread does not have a clipboard open.
1419        Hot key is not registered.
1420        The window is not a valid dialog window.
1421        Control ID not found.
1422        Invalid message for a combo box because it does not have an edit control.
1423        The window is not a combo box.
1424        Height must be less than 256.
1425        Invalid device context (DC) handle.
1426        Invalid hook procedure type.
1427        Invalid hook procedure.
1428        Cannot set non-local hook without a module handle.
1429        This hook procedure can only be set globally.
1430        The journal hook procedure is already installed.
1431        The hook procedure is not installed.
1432        Invalid message for single-selection listbox.
1433        LB_SETCOUNT sent to non-lazy listbox.
1434        This list box does not support tab stops.
1435        Cannot destroy object created by another thread.
1436        Child windows cannot have menus.
1437        The window does not have a system menu.
1438        Invalid message box style.
1439        Invalid system-wide (SPI_*) parameter.
1440        Screen already locked.
1441        All handles to windows in a multiple-window position structure must have the same parent.
1442        The window is not a child window.
1443        Invalid GW_* command.
1444        Invalid thread identifier.
1445        Cannot process a message from a window that is not a multiple document interface (MDI) window.
1446        Popup menu already active.
1447        The window does not have scroll bars.
1448        Scroll bar range cannot be greater than 0x7FFF.
1449        Cannot show or remove the window in the way specified.
1450        Insufficient system resources exist to complete the requested service.
1451        Insufficient system resources exist to complete the requested service.
1452        Insufficient system resources exist to complete the requested service.
1453        Insufficient quota to complete the requested service.
1454        Insufficient quota to complete the requested service.
1455        The paging file is too small for this operation to complete.
1456        A menu item was not found.
1500        The event log file is corrupt.
1501        No event log file could be opened, so the event logging service did not start.
1502        The event log file is full.
1503        The event log file has changed between reads.
1700        The string binding is invalid.
1701        The binding handle is not the correct type.
1702        The binding handle is invalid.
1703        The RPC protocol sequence is not supported.
1704        The RPC protocol sequence is invalid.
1705        The string universal unique identifier (UUID) is invalid.
1706        The endpoint format is invalid.
1707        The network address is invalid.
1708        No endpoint was found.
1709        The timeout value is invalid.
1710        The object universal unique identifier (UUID) was not found.
1711        The object universal unique identifier (UUID) has already been registered.
1712        The type universal unique identifier (UUID) has already been registered.
1713        The RPC server is already listening.
1714        No protocol sequences have been registered.
1715        The RPC server is not listening.
1716        The manager type is unknown.
1717        The interface is unknown.
1718        There are no bindings.
1719        There are no protocol sequences.
1720        The endpoint cannot be created.
1721        Not enough resources are available to complete this operation.
1722        The RPC server is unavailable.
1723        The RPC server is too busy to complete this operation.
1724        The network options are invalid.
1725        There is not a remote procedure call active in this thread.
1726        The remote procedure call failed.
1727        The remote procedure call failed and did not execute.
1728        A remote procedure call (RPC) protocol error occurred.
1730        The transfer syntax is not supported by the RPC server.
1732        The universal unique identifier (UUID) type is not supported.
1733        The tag is invalid.
1734        The array bounds are invalid.
1735        The binding does not contain an entry name.
1736        The name syntax is invalid.
1737        The name syntax is not supported.
1739        No network address is available to use to construct a universal unique identifier (UUID).
1740        The endpoint is a duplicate.
1741        The authentication type is unknown.
1742        The maximum number of calls is too small.
1743        The string is too long.
1744        The RPC protocol sequence was not found.
1745        The procedure number is out of range.
1746        The binding does not contain any authentication information.
1747        The authentication service is unknown.
1748        The authentication level is unknown.
1749        The security context is invalid.
1750        The authorization service is unknown.
1751        The entry is invalid.
1752        The server endpoint cannot perform the operation.
1753        There are no more endpoints available from the endpoint mapper.
1754        No interfaces have been exported.
1755        The entry name is incomplete.
1756        The version option is invalid.
1757        There are no more members.
1758        There is nothing to unexport.
1759        The interface was not found.
1760        The entry already exists.
1761        The entry is not found.
1762        The name service is unavailable.
1763        The network address family is invalid.
1764        The requested operation is not supported.
1765        No security context is available to allow impersonation.
1766        An internal error occurred in a remote procedure call (RPC).
1767        The RPC server attempted an integer division by zero.
1768        An addressing error occurred in the RPC server.
1769        A floating-point operation at the RPC server caused a division by zero.
1770        A floating-point underflow occurred at the RPC server.
1771        A floating-point overflow occurred at the RPC server.
1772        The list of RPC servers available for the binding of auto handles	has been exhausted.
1773        Unable to open the character translation table file.
1774        The file containing the character translation table has fewer than 512 bytes.
1775        A null context handle was passed from the client to the host during a remote procedure call.
1777        The context handle changed during a remote procedure call.
1778        The binding handles passed to a remote procedure call do not match.
1779        The stub is unable to get the remote procedure call handle.
1780        A null reference pointer was passed to the stub.
1781        The enumeration value is out of range.
1782        The byte count is too small.
1783        The stub received bad data.
1784        The supplied user buffer is not valid for the requested operation.
1785        The disk media is not recognized.  It may not be formatted.
1786        The workstation does not have a trust secret.
1787        The SAM database on the Windows NT Server does not have a computer account for this workstation trust relationship.
1788        The trust relationship between the primary domain and the trusted domain failed.
1789        The trust relationship between this workstation and the primary domain failed.
1790        The network logon failed.
1791        A remote procedure call is already in progress for this thread.
1792        An attempt was made to logon, but the network logon service was not started.
1793        The user's account has expired.
1794        The redirector is in use and cannot be unloaded.
1795        The specified printer driver is already installed.
1796        The specified port is unknown.
1797        The printer driver is unknown.
1798        The print processor is unknown.
1799        The specified separator file is invalid.
1800        The specified priority is invalid.
1801        The printer name is invalid.
1802        The printer already exists.
1803        The printer command is invalid.
1804        The specified datatype is invalid.
1805        The Environment specified is invalid.
1806        There are no more bindings.
1807        The account used is an interdomain trust account.  Use your global user account or local user account to access this server.
1808        The account used is a Computer Account.  Use your global user account or local user account to access this server.
1809        The account used is an server trust account.  Use your global user account or local user account to access this server.
1810        The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain.
1811        The server is in use and cannot be unloaded.
1812        The specified image file did not contain a resource section.
1813        The specified resource type can not be found in the image file.
1814        The specified resource name can not be found in the image file.
1815        The specified resource language ID cannot be found in the image file.
1816        Not enough quota is available to process this command.
1817        No interfaces have been registered.
1818        The server was altered while processing this call.
1819        The binding handle does not contain all required information.
1820        Communications failure.
1821        The requested authentication level is not supported.
1822        No principal name registered.
1823        The error specified is not a valid Windows RPC error code.
1824        A UUID that is valid only on this computer has been allocated.
1825        A security package specific error occurred.
1826        Thread is not cancelled.
1827        Invalid operation on the encoding/decoding handle.
1828        Incompatible version of the serializing package.
1829        Incompatible version of the RPC stub.
1898        The group member was not found.
1899        The endpoint mapper database could not be created.
1900        The object universal unique identifier (UUID) is the nil UUID.
1901        The specified time is invalid.
1902        The specified Form name is invalid.
1903        The specified Form size is invalid
1904        The specified Printer handle is already being waited on
1905        The specified Printer has been deleted
1906        The state of the Printer is invalid
1907        The user must change his password before he logs on the first time.
1908        Could not find the domain controller for this domain.
1909        The referenced account is currently locked out and may not be logged on to.
2000        The pixel format is invalid.
2001        The specified driver is invalid.
2002        The window style or class attribute is invalid for this operation.
2003        The requested metafile operation is not supported.
2004        The requested transformation operation is not supported.
2005        The requested clipping operation is not supported.
2202        The specified username is invalid.
2250        This network connection does not exist.
2401        This network connection has files open or requests pending.
2402        Active connections still exist.
2404        The device is in use by an active process and cannot be disconnected.
3000        The specified print monitor is unknown.
3001        The specified printer driver is currently in use.
3002        The spool file was not found.
3003        A StartDocPrinter call was not issued.
3004        An AddJob call was not issued.
3005        The specified print processor has already been installed.
3006        The specified print monitor has already been installed.
4000        WINS encountered an error while processing the command.
4001        The local WINS can not be deleted.
4002        The importation from the file failed.
4003        The backup Failed.  Was a full backup done before ?
4004        The backup Failed.  Check the directory that you are backing the database to.
4005        The name does not exist in the WINS database.
4006        Replication with a non-configured partner is not allowed.
6118        The list of servers for this workgroup is not currently available